Mergeworks Frosted Stackers - Cubicle Extender Panels - Clamp-on Mount
Extend the height of your cubicles to keep your work environment safe with Stacker panels from Mergeworks. Cubicle extender panels act as a barrier to airborne germs from coughing, sneezing, and close social interactions.
Extend the height of your cubicles to keep your work environment safe with Stacker panels from Mergeworks. Cubicle extender panels act as a barrier to airborne germs from coughing, sneezing, and close social interactions. Whether you are protecting your staff from COVID-19, or the annual influenza, Stackers allow you to extend the existing cubicle walls to help maintain a healthy environment. Made from 1/4 inch acrylic, these panels are easy to disinfect and sanitize. Frosted acrylic is fabricated from 100% virgin material and frosted on both sides. Stacker panel has 90° corners on bottom and radius corners on top. Also available in clear acrylic. See STKN-CLR-STW.C for clear option.
Mounts are easy to install and remove when needed. Tower mount attaches and holds the clamp-on brackets to the proper width creating a tight tension fit. Flush Mount Panels are 0.05” shorter than height listed to accommodate flush mount. Mount is for installation on a flat or curved panel top with a minimum top cap width of 1.9 inches. All mounts included. Kits include 2 or 4 mounts depending on width of Stacker panel. All panels 60" and above include 4 mounts. 60" and below include 2 mounts.
Mounts available in two sizes:
- Medium: Removable adjustable tension mount fits workstation top caps 1.9“ – 3.0” in width
- Large: Removable adjustable tension mount fits workstation top caps 2.9“ – 4.0” in width
Free shipping on orders of quantity 10 or more. Orders of 1-9 screens, add minimum $250 shipping charge. For larger orders, please contact us for ship time frames and pricing. Made in USA. Customization available- special materials, sizes, shapes and mounting options. Special pricing for larger orders. Please call to discuss your needs.
Note: First image shows tower mount. This product includes mount from second image without a gap.
|
Manufacturer: |
Mergeworks |
|
Application: |
Cubicle walls with flat or curved surface |
|
Mounting Type: |
Clamp-on Mount. Requires minimum top cap width of 1.9" |
|
Color: |
Frosted screens, Silver mounts |
|
Material: |
1/4" Acrylic Screen. Mount made from neodymium magnet |
|
Size: |
Widths in 6" increments from 24" to 72"; Heights: 12", 16", 18", 24", or 30". Flush Mount Panels are 0.05” shorter than height listed. |
|
Drilling Required: |
No |
|
Shipping: |
Minimum $300 on all orders. |
|
|
|
Cleaning Guide:
Our Clear and Frosted Acrylic can be safely cleaned and disinfected with most non-abrasive cleaners such as:
- Disinfecting wipes
- Disinfectant sprays
- Some Multi-Surface Cleaners
- Mild Soaps
Another option for cleaning Clear and Frosted Acrylic is preparing a bleach solution by mixing:
- 1/3 cup bleach per gallon of water OR
- 4 teaspoons bleach per quart of water
When cleaning Clear and Frosted Acrylic, always be sure to use a soft, non-abrasive cloth, such as a microfiber or lint free cloth, and apply light pressure only. Never use paper towels as it will scratch Frosted Acrylic.
Exclusions: This limited warranty does not apply, and no other warranty applies to:
If a product is defective in materials or workmanship, Company will replace or repair it subject to the provisions herein. This is your sole and exclusive remedy, and repair or replacement of the product will be at the sole discretion of Company. Shipping charges to the repair facility will be the responsibility of the purchaser, and shipping charges to return the repaired product to the purchaser will be paid by Company, except for products returned for repair during the first 35 days after the original ship date, in which case all shipping charges will be paid by Company. This limited warranty is subject to the limitations, exclusions, and other provisions herein, and applies to Company product purchased after September 1, 2019 which are delivered within the USA and Canada. Company will not be responsible for incidental damages, repairs, labor or other costs incurred in removal, return or reinstallation of defective product. Any other loss, expense, or damage incurred in replacing any defective product will be the responsibility of purchaser.
Payments securely processed by: 